DNCB-80-80-PPV-A - Control System Components

Part List

Sr. No. Description Qty. 01 Releco MRC 11 Pin 250V ac DIN Rail Relay Socket For use with MRC Series 11-Pin Relay Brand: Releco Manufacturers Part No.: S3-B 10 02 ENCODER RHI 593, MAKE- LEINE LINDE SR NO:24422865 SUPPLY: 9...30 V DCO/P :1024 PPR HTLFOR KABMAK EXTRUDER ABB MOTOR PART NO: 649736-01 01 03 DRIVE 690PD/0220/400/0010 EUROTHERM AC DRIVE 690PD/0220/400/0010/GB/0/0/0/BO/0/0; INPUT- 380-460V, 61A,3PHAC,50HZ; OUTPUT 0 TO 380/460V, 59A, 3PHAC, 0 TO 1KHZ FOR PORTIER PAY-OFF AND TAKE UP REEL DRIVE 01 04 SWITCH PRES PT- 161168 MAKE- FESTO O-10 BAR 0-10V; MODEL- 60-514268 ID:Y40C1 PRESSURE SWITCH FOR SKALTEK ACCUMULATOR 01 05 MAGNETIC BRAKE MEROBEL . FRATO 2002 MAGNETIC BRAKE MAKE: MEROBEL TYPE: FRATO 2002 REF: ME330240-00 COOLING: WATER FOR 80MM EXE BRAKE CAPSTON 01 06 BRAKE MEROBEL -FRAT0650 MAKE: MOROBEL REF: ME322500-00 FOR EMB 500 ELECTROMAGNETIC BRAKE FOR 100MM EXTRUDER 01 07 RELAY, Part no: TP-HSR-3D 404Z MAKE- HANYOUNG 40A 90-480VAC-50/60HZ 05 08 BELT TIMER 4600-20M-170 HTD0 02 09 CONTACTOR PT-602217 Part no: TP-C19 MAKE- DANFOSS COIL VOLT-24V AC AC1 25AMPS AC3 400V , 9AMPS,4KW; AUX. CONTACT A600; IEC 947-4-1; EN 60947-4-1; FOR DRY HOPPER DH6000 05 10 ENCODER ROD 0431025-1024 MAKE- HEIDENHAINID Part no: 735117-02 10V-30V HTL 01 11 BRAKE FDB17 PRECIMA BRAKE UNIT FOR 150MMEXTRUDER(M) MAKE- PRECIMA MODEL- FDB 17 241. 01 12 PCB AC,PT-A744053 Make: PANASONIC SPLIT AC INDOOR UNIT PCB; UNIT MODEL: CS-PC-24HKF; S NO: 7727119264 04
anemometer
Contelec PL425，2 pcs
"Table No. 1 for devices for accounting natural gas consumption of technical units of LPC JSC ""Uzmetkombinat"":

Characteristics of the measured medium: natural gas.
Characteristics of natural gas: molar percentage of nitrogen (N2) – 0.5%; molar percentage of carbon dioxide (CO2) – 1.82%.
Excess pressure – 1100 kPa absolute.
Barometric pressure – 720 mmHg.
Temperature – 20 °C.
Compressibility factor under operating conditions – 0.97701.
Compressibility factor under standard conditions – 0.99782.
Compressibility coefficient – 0.97915.
Density under operating conditions – 8.08943 kg/m³.
Density under standard conditions – 0.72961 kg/m³.
Dynamic viscosity – 10.94 μPa·s.
Adiabatic index – 1.292.

Complex parameters for the flowmeter with differential pressure sensor of the Head Node of LPC:
Ambient temperature –30÷+60 °C.
Flow range under standard conditions: lower limit 3046 m³/h; upper limit 8870 m³/h.
Upper limit of differential pressure – 50 kPa.
Upper limit of absolute pressure measurement – 1600 kPa.
Normalized flow value – 20000 m³/h.
Presence of mechanical impurities: soot is present, content unknown.
Pipeline inner diameter – 273 mm.
Pipeline material – Steel 20.
Explosion protection – Yes.
Protection – IP65.
Flowmeter version – compact, with computer for flow calculation.
Output signal.
Power supply ≈ 220–240V, 50Hz.
Display – Yes.
Accuracy class – not more than 0.1%.
Valve block – 1 pc.
Gas analyzer – 1 pc.
Additions: power supply for the device – 24 V, 2 pcs; temperature transducer (–20 to +60 °C; length 100 mm) – 1 pc.

Complex parameters for the flowmeter with differential pressure sensor of the ESPP Node of LPC:
Ambient temperature –30÷+60 °C.
Flow range under standard conditions: lower limit 1454 m³/h; upper limit 5118 m³/h.
Upper limit of differential pressure – 50 kPa.
Upper limit of absolute pressure measurement – 1600 kPa.
Normalized flow value – 20000 m³/h.
Presence of mechanical impurities: soot is present, content unknown.
Pipeline inner diameter – 150 mm.
Pipeline material – Steel 20.
Explosion protection – Yes.
Protection – IP65.
Flowmeter version – compact, with computer for flow calculation.
Output signal.
Power supply ≈ 220–240V, 50Hz.
Display – Yes.
Accuracy class – not more than 0.1%.
Valve block – 1 pc.
Gas analyzer – 1 pc.
Additions: power supply for the device – 24 V, 2 pcs; temperature transducer (–20 to +60 °C; length 100 mm) – 1 pc.

Complex parameters for the flowmeter with differential pressure sensor of the CCM Node of LPC:
Ambient temperature –30÷+60 °C.
Flow range under standard conditions: lower limit 1592.9 m³/h; upper limit 3216 m³/h.
Upper limit of differential pressure – 50 kPa.
Upper limit of absolute pressure measurement – 1600 kPa.
Normalized flow value – 20000 m³/h.
Presence of mechanical impurities: soot is present, content unknown.
Pipeline inner diameter – 150 mm.
Pipeline material – Steel 20.
Explosion protection – Yes.
Protection – IP65.
Flowmeter version – compact, with computer for flow calculation.
Output signal.
Power supply ≈ 220–240V, 50Hz.
Display – Yes.
Accuracy class – not more than 0.1%.
Valve block – 1 pc.
Gas analyzer – 1 pc.
Additions: power supply for the device – 24 V, 2 pcs; temperature transducer (–20 to +60 °C; length 100 mm) – 1 pc."
"1. RELAY, PARALLELING DEVICE, U-RATED 100V-125VAC, F-RATED 50/60HZ, I-LOAD 5A/240VAC, U-AUX 110V-250VDC, U-AUX 115V-230VAC 45-65HZ
7VE6110-5EB92-0DA0/DD SIEMENS
QTY 1 EA"
"BUCHER QX52-063/52040R298 - 1pcs
Koganei 110-4E1-J42-PLL DC24V - 2pcs
Nippon Oil Pump TOP-YTH1500A3-S216EVD15C - 1pcs
SDR Ettus Research USRP X310 - 6pcs
Stahl 8560/51-4272 - 1pcs
Tribos HSK-E25 DATRON 0068302G - 5pcs"
"Datalogic TL80-015 SH1545 - 1pcs
Linak LA12 12100-1130242 24B 130мм - 2pcs
SINGA SGTH2548ZD3 - 10pcs
SINGA SGTH4053ZD3 - 10pcs
Trio MC 464 P860-06087 - 1pcs
XINXON JGX-3 D4840 - 10pcs
JOHNSON CONTROLS M9216-BGC-1 - 4pcs
Omron D4E-3B20N - 2pcs
Omron E3T-ST14 2M - 2pcs
Schmersal SRB-C 46/e-24V - 2pcs
Turck LX3ESRQ - 1pcs
Turck LX3RSRQ - 1pcs
AMF 90043 - 1pcs
AMF 90068 - 4pcs
AMF 99564 - 4pcs
Char-Lynn 112-1345-006 - 1pcs
PROGALVANO E192 4pcs
TEE Electric Motors QS FA 132S2A-92 N Vib.CIR/049252 HC - 1pcs"
"FESTO ADN-100-160-A-P-A - 1pcs
FESTO B32 - 4pcs
FESTO DNCB-80-80-PPV-A - 4pcs
FESTO H-5-1/4B - 1pcs
Festo LFR-3/8-D-MIDI-KC - 1pcs

Sourcing Information

For quotation, datasheet requests or bulk order inquiries:
- Email: candice@ausenist.com
- WhatsApp: +86 15959950473
- Please provide: exact brand, part number, quantity and application details.

Verification

• Source: Original input text, preserved without modification