9851501 These single door wallmount enclosures can be used for virtually any application. The WM series ensures NEMA protection through a secure locking system, foamed-in-place gasket, and knife-edge sealing surface. Features include a stainless steel body and door, and a zinc plated mounting panel.

2592000 SZ Cable conduit holder, for cable conduit ø 48 mm

1589000 KX Terminal box, WHD: 400x150x120 mm, sheet steel, without mounting plate, with cover, without gland plate

4598000 TS support strip, for TS, VX SE, TP, for door width: 800 mm, L: 690 mm

1468500 KS Plastic enclosure, WHD: 600x800x300 mm, Fibreglass-reinforced unsaturated polyester, with mounting plate, with door

9673683 For attaching directly to the compartment side panel modules for internal separation. Universal internal installation with switchgear and control devices. Creation of additional mounting levels. In combination with functional space dividers and side panel modules, internal separation in accordance with Form 2, 3 or 4 is possible.

8108245 VX Side panel, screw-fastened 2000x800 mm

9672183 SV Partial door, WH: 800x300 mm, for TS

8018112 JB141206H4JB 14X12X6 HINGED 304 SS N4X

8611080 TS Handle adaptor for comfort handle, for glazed door TS, RAL 7035

5050518 KL Accessory bag with 4 bolts

5830609 5830600 Modified

8617505 VX baying kit for VX / TS

2364000 SZ PE busbar, L: 699 mm

9673062 Side divider panel for compartments, locates into the TS hole pattern. Prepared for the location of mounting brackets for horizontal functional space dividers or mounting plates. Two TS system punchings allow the use of additional TS accessories. The side panel modules for reduced functional space depth and an auxiliary construction using TS punched rails 17 x 17 mm can be used to provide a separate enclosure space in the side panel area, e.g., for the provision of a busbar system.

6205100 CP Mounting bracket, for interior installation, for Comfort Panel and Optipanel

8610805 TS Glazed door, for TS, TS IT, SE, for WH: 800x2000 mm

9341130 SV Base tray, L: 1100 mm (PLS 800)

9340220 SV Support panel, for cover section, SV 9640200/210

8018579 L handle for stainless steel WM enclosures with 3-point latching

1549000 KX E-Box, WHD: 200x200x120 mm, sheet steel, with mounting plate, with door

1517000 KX Terminal box, WHD: 300x200x80 mm, sheet steel, without mounting plate, with cover, without gland plate

9672316 SV Front trim panel, for TS, top, WH: 600x100 mm, protection category IP 54

1500000 KX Terminal box, WHD: 150x150x120 mm, sheet steel, without mounting plate, with cover, without gland plate

8018695 WM-S201612N4

8625500 For the North American market, we have enhanced our product offerings to include the below additional size options. Baying systems TS 8 with mounting plate. Protection category IP 55.

9673485 For the horizontal separation of compartments. In combination with the side panel modules, creates separation to Form 3 or 4.

XCA8013330 L-MPLJ2016CS 17.00 X 13.00

5051096 VX Single door WxH 800x2000

2515300 AX Sheet steel wiring plan pocket, width-variable, L: 475 - 575 mm , for door width 600 mm

9965641 L HANDLE F/WM W/PADLOCK W/DEFEATOR W/COIN SLOT, BLACK

8617730 VX Punched rail 18 x 39 mm

6539010 CP Command panel housing with door, WHD: 600x400x150 mm, Stainless steel 1.4301

5831609 5831600 modified

8406500 TS ENCLOSURE RAL 7035 BHT 400X2000X600 MM

3396258 SK RADIALVENT.RB2C 190/060

8950060 TS TS isolator door cover (US version), WHD: 100x1800x500 mm

2533000 SZ Plastic handle, version B, without lock cylinder insert

8018515 WM483616N4WM 48X36X16 304 #4 BRUSHED

8017550 WM244208NCWM 24X42X8 CARBON STEEL 7035

8018453 WK1308C

9851.503 WM242412N43PT

8800040 TS Lock component, for TS, TS IT, SE

3105350 SK enclosure heater, without fan, 63-75 W, 110-240 V, 1~, 50/60 Hz, WHD: 64 x 230 x 56 mm

8017618 WM362408N4WM 36X24X8 304 #4 BRUSHED

9522000 PK Polycarbonate enclosure, WHD: 254x180x165 mm, fibreglass-reinforced polycarbonate, without knockouts, with grey cover

6717500 TP TopConsole system, desk unit for 3-part assembly, WD 1600x730 mm, carbon steel

1515000 KX Terminal box, WHD: 300x150x80 mm, sheet steel, without mounting plate, with cover, without gland plate

9340120 SV Base tray, L: 900 mm

6106200 CP Pedestal base plate modular, large, CP 60, WHD: 490x100x600 mm

8612680 TS TS punched section without mounting flange, 45 x 88 mm, for inner mounting level: for WD: 800 mm

8017560 WM483608NCWM 48X36X8 CARBON STEEL 7035

7078000 DK cable clamps, for cable diameter Ø: 12 - 18 mm

5050167 TS DOOR LH 500x2000 RAL7035

1031000 AX Compact enclosure, WHD: 380x300x210 mm, sheet steel, with mounting plate, single-door, with one cam lock

9977488 To bay 316 Stainless Steel Enclosure Systems

9673064 Side divider panel for compartments, locates into the TS hole pattern. Prepared for the location of mounting brackets for horizontal functional space dividers or mounting plates. Two TS system punchings allow the use of additional TS accessories. The side panel modules for reduced functional space depth and an auxiliary construction using TS punched rails 17 x 17 mm can be used to provide a separate enclosure space in the side panel area, e.g., for the provision of a busbar system.

3396257 SK RADIALVENT.RB2C 225

8017667 PB-04225M1C

2384010 SM Switch housing, WHD: 100x100x90 mm, Stainless steel 1.4301, without mounting plate, 1 switch cut-out

7094130 DK Multi-tooth screws, M5 x 16 mm, Bitgröße: 25

4695000 TS support strip, for VX, TS, VX SE, TP, for outer mounting level: for W/D: 500 mm, L: 440 mm

7097220 DK cable clamps, for cable diameter Ø: 22 - 26 mm

8018514 These single door wallmount enclosures can be used for virtually any application. The WM series ensures NEMA protection through a secure locking system, foamed-in-place gasket, and knife-edge sealing surface. Features include a stainless steel body and door, and a zinc plated mounting panel.

8018139 JB121008H4JB 12X10X8 HINGED 304 SS N4X

4944000 SZ C rail 30/15 to EN 60 715, for TS, SE, for W/D: 600 mm, L: 555 mm

1580000 KL Wall mounting bracket, brass, nickel-plated, Wall distance 8 mm

8800885 TS Baying cover, top, for D: 800 mm, Plastic, RAL 7035

3092000 SV Busbar cover section, for demension WH: 12x5-30x10 mm, L: 1000 mm/section

9973103 Door for TS

5051024 "VX Mountingplate WxH 1000x2000

For enclosure WxH 1000x2000"

7829300 TS DK SWIVEL HANDLE RAL7035 -

3105360 SK enclosure heater, without fan, 86-100 W, 110-240 V, 1~, 50/60 Hz, WHD: 90 x 165 x 75 mm

1575000 KX E-Box, WHD: 300x300x155 mm, sheet steel, with mounting plate, with door

5050165 TS DOOR RH 500x2000 RAL7035

1110000 AX Compact enclosure, WHD: 1000x1000x300 mm, sheet steel, with mounting plate, two-door, with two cam locks

8618521 VX Top-mounting module for WD 1000x600mm H:200mm

9963530 Floor stand kit for SE8 / TS8 enclosures. Material carbon steel, stainless steel 304, or stainless steel 316L.

2500520 SZ Connection cable, for power supply, 2-pole, 100-240 V, L: 3000 mm, UL

6681000 Premium panel made from stainless steel 1.4301 (AISI 304), resistant to high-pressure cleaning, protection category IP 69K.

6206460 CP Tilting adaptor +100°/-60°, CP 60/120, for support arm connection 120 x 65 mm

3397496 SK-A/C Spare Part-Compressor for 3386

1017600 AE Compact enclosure, WHD: 800x1200x300 mm, Stainless steel 1.4301, with mounting plate, single-door, 3-point lock system

3396733 Inverter

9340390 SV OM adaptor, 32 A, 690 V, 3-pole, connection cable AWG 10, WH: 45x272 mm, support frame, support rail TS 45D, TS 45D-V

8017554 WM362408NCWM 36X24X8 CARBON STEEL 7035

1480000 AX compact enclosure, fiberglass-reinforced polyester, WHD: 800x1000x300 mm

8018418 For mounting wallmount enclosures to the floor in accordance with floormount standards. Stainless steel 1.4301 (AISI 304), 12ga, Brushed Finish.

5050681 TP Cover 6710/14/6746 BxT 592x516

2543235 SK Integrated louvres, Sheet steel, WHD: 330 x 110 x 8 mm

RIT5051300 AX Accessory bag

8018705 WM-S363012N4

3397341 FLOW SWITCH F.3320,3334 SK 3320 500

2394300 AX rail for interior installation, for D: 300 mm

3396317 Radial fan

8018981 These flange mount disconnect wallmount enclosures can be used for virtually any application. The WM series ensures NEMA protection through a secure locking system, foamed-in-place gasket, and knife-edge sealing surface. Features include a cold rolled steel body and door, and a zinc plated mounting panel.

8405500 For the North American market, we have enhanced our product offerings to include the below additional size options. Baying systems TS 8 with mounting plate. Protection category IP 55.

1116199:MODCA:116322:001 "Enclosure Part Number 1116000

Product Family AX

Width 1,200.0 mm

Height / Length 1,200.0 mm

depth 400.0 mm

Coloring RAL7035 structure standard

Drawing number TO BE PROVIDED

Modification Group Enclosure Modified

Enclosure Modification modified"

9951153 Includes operator handle interlocking kit to securely lock most commercially available operator handles to enclosure and door latch

8018820 The consolet is one-piece enclosure body with 30 or 60 degree slope depending on orientation. The pedestal column is designed to be used in conjunction with the pedestal base.

8665500 TS Bayed enclosure system, WHD: 600x1600x500 mm, Sheet steel, with mounting plate, single door at the front

6320650 AX Operating housing with handle strips, WHD: 600x600x210 mm, sheet steel, aluminium handle strips, servicing access from the rear

5051030 VX Mountingplate WxH 1200x2200 For enclosure WxH 1200x2200

3140100 SK roof-mounted fan TopTherm, 873/965 m³/h, 230 V, 1~, 50/60 Hz, WHD: 400 x 133 x 400 mm

6212780 CP Wall-mounted hinge CP 120, outlet horizontal, without height offset