Quanzhou Ausenist Technology Co., Ltd -
52275065 SHAFT ASSEMBLY The secondary shaft 52275065 is for the gearbox GEN105 and GEN108. If gearbox is GEN205 or GEN208, use ID 52411063! Check the gearbox type.
52275065 SHAFT ASSEMBLY The secondary shaft 52275065 is for the gearbox GEN105 and GEN108. If gearbox is GEN205 or GEN208, use ID 52411063! Check the gearbox type. -
53109976 PENDANT CONTROLLER 2HS+ES, Cable Length: 2.5 m
53109976 PENDANT CONTROLLER 2HS+ES, Cable Length: 2.5 m -
52759769 ROPE Diameter: 12 mm, Lay Type and Direction: Right Hand Lang Lay, Complete Strand Designation: 6X36WS-FC
52759769 ROPE Diameter: 12 mm, Lay Type and Direction: Right Hand Lang Lay, Complete Strand Designation: 6X36WS-FC -
55467865 WIRE ROPE Diameter: 26.00 mm, Lay Type and Direction: Left Hand Ordinary Lay, Minimum Breaking Load: 597.000 kN, Complete Strand Designation: 8XK26WS-EPIWRC
55467865 WIRE ROPE Diameter: 26.00 mm, Lay Type and Direction: Left Hand Ordinary Lay, Minimum Breaking Load: 597.000 kN, Complete Strand Designation: 8XK26WS-EPIWRC -
52814924 TRANSMITTER Minijoystick for crane drive. 2 axis, Color: Red, 2-hoists (I, II) and floodlights, ANSI standard direction symbols
52814924 TRANSMITTER Minijoystick for crane drive. 2 axis, Color: Red, 2-hoists (I, II) and floodlights, ANSI standard direction symbols -
52871921 END SHIELD Brake end shield set for ABUS GM3000 GM5000 GM6000 GM7000 Drive unit AZP/D/DQA/Z/S 280, Motor 1.10 / 1.30 kW
52871921 END SHIELD Brake end shield set for ABUS GM3000 GM5000 GM6000 GM7000 Drive unit AZP/D/DQA/Z/S 280, Motor 1.10 / 1.30 kW -
52867068 COUPLING Nominal Diameter: 75 mm, Secondary Axle Diameter: 65 mm, Drive Axle Diameters: 60 mm, Nominal Torque: Max. 5650 Nm, Length: 171 mm, Width: 263 mm
52867068 COUPLING Nominal Diameter: 75 mm, Secondary Axle Diameter: 65 mm, Drive Axle Diameters: 60 mm, Nominal Torque: Max. 5650 Nm, Length: 171 mm, Width: 263 mm -
70793133 WIRE ROPE SET DR20 18 H24 8/1 - 64.1m
70793133 WIRE ROPE SET DR20 18 H24 8/1 - 64.1m