3239110 SK fan and filter units TopTherm, 105/120 m³/h, 115 V, 1~, 50/60 Hz, WHD: 204 x 204 x 24 mm

3238110 SK fan and filter units TopTherm, 55/66 m³/h, 115 V, 1~, 50/60 Hz, WHD: 148.5 x 148.5 x 16 mm

3238200 SK outlet filter, Standard, WHD: 148.5 x 148.5 x 24 mm

3241110 SK fan and filter units TopTherm, 230/250 m³/h, 115 V, 1~, 50/60 Hz, WHD: 255 x 255 x 25 mm

3240200 SK outlet filter, Standard, WHD: 255 x 255 x 25 mm

3172100 SK spare filter mats, for filter fans, for SK 3240…/3241…, WHD: 221 x 221 x 17 mm

1050250 XCA1050250, WM202008NC Enclosure, 20Hx20Wx8"D, Hinged, w/ backplate, Nema 1/12/3R/4, MTL, LT.GRY

3173100 SK spare filter mats, for filter fans, for SK 3243…/3244…/3245…, WHD: 289 x 289 x 17 mm

3110000 SK Thermostat, enclosure internal thermostat, 24-230 V, 1~, 24-60 V (DC), Colour RAL 7035, WHD: 71 x 71 x 33.5 mm

3243200 SK outlet filter, Standard, WHD: 323 x 323 x 25 mm

3237200 SK outlet filter, Standard, WHD: 116.5 x 116.5 x 16 mm

2500300 SZ System Light LED, 1200 Lumen, L: 437 mm, 100-240 V, with integral motion detector

3239200 SK outlet filter, Standard, WHD: 204 x 204 x 24 mm

3243110 SK fan and filter units TopTherm, 550/600 m³/h, 115 V, 1~, 50/60 Hz, WHD: 323 x 323 x 25 mm

3244110 SK fan and filter units TopTherm, 700/770 m³/h, 115 V, 1~, 50/60 Hz, WHD: 323 x 323 x 25 mm

1060250 WM242408NC Enclosure, 24Hx24Wx8"D, Hinged, w/ backplate, Nema 1/12/3R/4, MTL, LT.GRY.

1045250 These single door wallmount enclosures can be used for virtually any application. The WM series ensures NEMA protection through a secure locking system, foamed-in-place gasket, and knife-edge sealing surface. Features include a cold rolled steel body and door, and a zinc plated mounting panel.

3237124 SK fan and filter units TopTherm, 20 m³/h, 24 V (DC), WHD: 116.5 x 116.5 x 16 mm

3183100 SK fine filter mats, for filter fans, for SK 3243…/3244…/3245…, WHD: 289 x 289 x 12 mm

8017544 WM202408NCWM 20X24X8 CARBON STEEL 7035

4377000 SZ TS punched section without mounting flange, 23 x 73 mm, for TS, SE, for WHD: 800 mm, L: 695 mm

3240060 SK outlet filter, EMC, WHD: 255 x 255 x 25 mm

2374000 SG Mounting component for conduit mounting, for signal pillar, modular and LED-compact, Base with integral conduit, Ø 25 mm, L: 110 mm

8802120 TS profile for cable entry, centered, for TS, VX SE, TP, for W: 1200 mm

9516000 PK Polycarbonate enclosure, WHD: 180x110x165 mm, fibreglass-reinforced polycarbonate, without knockouts, with grey cover

6664100 CP Tilting adaptor 10°, CP 40, stainless steel, 1.4305

9672188 SV Partial door, WH: 800x800 mm, for TS

5051.035 VX Mounting Plate 600 x 1600

8018129 JB080604H4JB 8X6X4 HINGED 304 SS N4X

2400300 SZ Connector gland, small, for 2 cable ø 6-8 mm

6660010 CP Support section CP 40, solid, L: 1000 mm, stainless steel, 1.4301

2503020 SZ Wall mounting bracket, for AX and KX, sheet steel, wall distance: 40 mm

1513000 KX Terminal box, WHD: 800x400x120 mm, sheet steel, without mounting plate, with cover, without gland plate

9975045 SWING PANEL WMSP3630C

2350000 SZ Cable clamp, for cable clamp rail, for cables ø 6-12 mm

2571100 SZ Metal gland plate, for AX, with metric knockouts, WD: 256x149 mm, for gland plates size 1

5050147 TS Locking rod, adjacent door

2376001 SG acoustic component, 95 - 105 dB

2500600 SZ Jack, for power supply and through-wiring, 3-pole, 100-240 V, Connection accessories for self-assembly

8612260 TS Punched rail 18 x 38 mm, for W/D: 600 mm

3396268 SK RADIALVENT.R2E133BH72-24

3105310 SK enclosure heater, without fan, 8-10 W, 110-240 V, 1~, 50/60 Hz, WHD: 45 x 120 x 46 mm

2541235 SK Integrated louvres, Sheet steel, WHD: 160 x 110 x 8 mm

2519200 CM Door stay, for CM, TP

3243060 SK outlet filter, EMC, WHD: 323 x 323 x 25 mm

5050621 HD Gasket profile 150x150MM

1577000 KX E-Box, WHD: 300x400x155 mm, sheet steel, with mounting plate, with door

9340290 SV Inserted strip, for OM adaptor/support, W: 10 mm

8612580 TS TS punched section with mounting flange, 23 x 73 mm, for inner mounting level: W/D: 800 mm

1001600 AE Compact enclosure, WHD: 200x300x120 mm, Stainless steel 1.4301, with mounting plate, single-door, with one cam lock

6218300 CP Coupling CP 180, for support arm connection Ø 130 mm

1100000 AX Compact enclosure, WHD: 1000x760x210 mm, sheet steel, with mounting plate, two-door, with two cam locks

8018236 Seals unused or empty pushbutton holes, conduit openings, and knockout openings. Protects against the ingress of dirt, dust, oil, and water.

6218820 CP Wall/base mounting bracket CP 180, small

9672326 SV Front trim panel, for TS, top, WH: 600x300 mm, protection category IP 54

9975046 SWING PANEL WMSP3636C

8620094 VX Base/plinth trim panel, with brush strip, for W/D: 1000 mm

9344010 SV NH fuse-switch disconnector, size 00, 160 A, 690 V, 3-pole, screw M8, for mounting plate assembly

8017648 The NEMA rated PB series pushbutton box enclosure is designed for indoor use to house pushbuttons, selector switches, and pilot lights. This enclosure protects equipment from dirt, dust, sprayed water, oil, and coolants.

5051368 "AX Mounting plate For enclosure WxH 300x300"

3396267 SK RADIAL FAN R2E133BH72-26

2467000 SZ Semi-cylinder for handle systems, lock-insert locking Nr. 3524 E

6148000 CP Twin castors, je 2 with/without lock, static load per castor 75 kg

6664300 CP Angle piece 90°, CP 40, stainless steel, 1.4305

9340200 SV Cover section, L: 700 mm

9964893 SIDEWALLS 2200 x 500

4638800 PS Utility lectern, for TS, SE, CM, PC, for door width 800 mm

1684600 HD Switch housing 1.4301 for 4 Switches d=22,5 mm

8018414 FSK2410C

2459500 SZ Pressure relief stoppers

8019510 Door for WM

5051313 Replacement hinge for AX Series

9635010 SV Board, 125 A, 690 V (AC). 600 V (DC), 3-pole, WHD: 405x160x45,1 mm

8018822 The consolet is one-piece enclosure body with 30 or 60 degree slope depending on orientation. The pedestal column is designed to be used in conjunction with the pedestal base.

3031000 SV Base isolator, H: 40 mm, thread M10

8017534 WM241606NCWM 24X16X6 CARBON STEEL 7035

8619440 VX Cable clamp rail, mounting angle, for W: 1200 mm

8018411 FSK1810C

6212640 CP Adaptor, for support arm combination CP 120/60

6206400 CP Tilting adaptor 10°, CP 60/120, for support arm connection Ø 130 mm

9673662 For attaching directly to the compartment side panel modules for internal separation. Universal internal installation with switchgear and control devices. Creation of additional mounting levels. In combination with functional space dividers and side panel modules, internal separation in accordance with Form 2, 3 or 4 is possible.

9975007 The Deep-Hinged Window Kit (WKDH) is used as a viewing window where access to components mounted behind the window is required. It is designed to protect HMI displays and components mounted on enclosure panels from wash-down, rain, snow, sleet, dirt and dust. WKDH fits on the usable area of Rittal’s standard wall-mount, free-standing TS8/SE8 and other enclosure panels. Window depth allows for use of extra deep pushbuttons (~2”/50mm). It comes with a full-size drill template for easy mounting.

3285800 SK filter mat, for cooling unit 3185.830, WHD: 360 x 297 x 10 mm

8800110 TS Hinge for side panel, screw-fastened, sheet steel

8018462 WK2315C

8612560 TS TS punched section with mounting flange, 23 x 73 mm, for inner mounting level: W/D: 600 mm

2410021 HD Cable gland, stainless steel 1.4305, size: M20x1,5, for cables Ø 6-12 mm, Standard version

4315820 SZ Door-operated switch, for System light LED compact, L: 1000 mm, with LED interconnecting cable

1180000 AX Compact enclosure, WHD: 800x1000x300 mm, sheet steel, with mounting plate, single-door, with two cam locks

3105380 SK enclosure heater, with fan, 250/265 W, 230 V, 1~, 50/60 Hz, WHD: 103 x 200 x 103 mm

5050177 TS DOOR LH 600x1800 RAL7035

5050052 Rittal, 5050052, TS Locking rod, main door H: 2000 mm

2351000 SZ Cable clamp, for cable clamp rail, for cables ø 12-16 mm

8017559 WM423608NCWM 42X36X8 CARBON STEEL 7035

9345610 SV Circuit-breaker component adaptor, 250 A, 690 V, 3-pole, cable outlet bottom, with connection straps

2500490 VX Mounting kit magnet, for LED system light

8018895 WMQTLA

8950850 TS TS isolator door cover (US version), WHD: 100x2000x600 mm

5058023 Repair service

8018459 WK1711C

2372011 SG LED steady light component, green

2372021 SG LED steady light component, yellow

2372001 SG LED steady light component, red

8609860 TS Divider panel, for TS, for WD: 1800x600 mm

8018113 JB161406H4JB 16X14X6 HINGED 304 SS N4X

1446000 AX compact enclosure, fiberglass-reinforced polyester, WHD: 400x600x200 mm

5502100 DK Cable duct, 38 U, for TS IT, Height 1800 mm: with mountingframe, Height 2000 mm: with profiles

5050149 Not suitable for use with TS IT and SK air-conditioning doors.

9951145 Includes operator handle interlocking kit to securely lock most commercially available operator handles to enclosure and door latch

8018144 JB100806H6JB 10X8X6 HINGED 316 SS N4X

2500460 SZ Door-operated switch, with connection wire, L: 800 mm, black

6206900 CP Mounting component, for signal pillar, modular and LED-compact, for support arm system CP 60

3396251 SK RADIALVENT.R2E133BH66-34

2092200 EL Captive nuts, M6, Without contact, For metal thickness: 0,8-2,5 mm

8802125 TS profile for cable entry, rear, for TS, VX SE, TP, for W: 1200 mm

3286880 SK Stoppers, for cooling unit SK 3209/3210/3273/3383/3384/3385, Ø 100 mm

6013000 CP Clipboard

3322720 SK Pleated filter IP54 for 3238.xxx for filter fans, 1 PU = 5 pcc

8018828 The consolet is one-piece enclosure body with 30 or 60 degree slope depending on orientation. The pedestal column is designed to be used in conjunction with the pedestal base.